|
SPECIFICATIONS
COVER: 1-piece sand cast aluminum Snap-Tight complies with H20 rating
COVER FINISH: heavy duty epoxy coating
205 BODY: 2-Piece sand cast ductile iron
215 BODY:
UPPER SECTION: sand cast ductile iron
LOWER SECTION: polyethylene
RISER FLANGE: ductile iron
206 BODY:
UPPER SECTION: sand cast ductile iron
LOWER SECTION: polyethylene
RISER FLANGE: ductile iron
DRAIN VALVE ASS'Y: 2-piece 356T6 hard coat anodized aluminum
ARMS: 303 stainless steel throughout mechanism with 1" solid bar on push rod
|
. |
FEATURES
Water tight even when totally submerged, keeping water out of the containment and your tanks
Flush mount pull handle on covers. There are no sharp edges on the whole unit allowing for easy snowplowing. We recommend using Mobil synthetic or equal to grease shaft on Snap-Tight cover once a year for easy movement
Direct in-line drain
Hand removable screen for easy cleaning
1-3/8" flange for concrete support
Extra heavy duty lift and lock down handle will allow easy locking by stepping on it.
Push drain assembly to allow product to drain back to tank
Field adjustment of 4.75"
Will not rattle when run over by a vehicle.
Does not require speedbump to keep water out
|
